Part Number Hot Search : 
IAS012ZH TS4142 TC74LC ADVANCED 1N493 C2581 309UA160 MV7442
Product Description
Full Text Search
 

To Download TEN15WI Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 DC/DC Converters
TEN 15WI Series, 15 Watt
RoHS
compliant
pending
Features Ultrawide 4 : 1 Input Range High Efficiency up to 86% Extended Operating Temperature Range
- 40C to +85C
Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and
FCC, Level A without external Components

Remote On/Off Industry Standard Pinout Six-Side Shielded Case Lead free Design - RoHS compliant 3 Year Product Warranty
The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40C to +85C.
Models
Ordercode TEN 15-2410WI TEN 15-2411WI TEN 15-2412WI TEN 15-2422WI TEN 15-2423WI TEN 15-4810WI TEN 15-4811WI TEN 15-4812WI TEN 15-4822WI TEN 15-4823WI 18 - 75 VDC 9 - 36 VDC Input voltage range Output voltage 3,3 VDC 5,1 VDC 12 VDC 12 VDC 15 VDC 3,3 VDC 5,1 VDC 12 VDC 12 VDC 15 VDC Output current max. 3'000 mA 2`950 mA 1'250 mA 625 mA 500 mA 3'000 mA 2`950 mA 1'250 mA 625 mA 500 mA Efficiency typ. 78 % 82 % 85 % 85 % 86 % 78 % 82 % 85 % 85 % 86 %
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
TEN 15WI Input Specifications
Input current at no load Input current at full load 24 Vin; 24 Vin; 48 Vin; 48 Vin; 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. 3.3 Vout other output 3.3 Vout other output models: models: models: models: 528 mA typ. 740 mA typ. 264 mA typ. 370 mA typ.
15 Watt
Surge voltage (100 msec. max.) Conducted noise (input)
24 Vin models: 50 V max. 48 Vin models: 100 V max. EN 55022 level A, FCC part 15, level A 1% - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 0.5 % max. 1 % max. 80 mVpk-pk max. 0.02 % / K > 110% of Iout max., foldback indefinite (automatic recovery) single output models: 470 F max. dual output models: 220 F max. - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C 3.5%/K above 70C 95 % rel H max. > 700'000 h @ + 25 C 1`500 VDC 1200 pF typ > 1'000 MOhm 330 kHz typ. (pulse width modulation) - On: - Off: - Off idle current: 2.5 ... 5.5 VDC or open circuit. -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 10 mA max. UL 60950, EN 60950, IEC 6095 (Compliance up to 60 VDC input voltage(SELV limit) UL /cUL pending - Input/Output - Input/Output - Input/Output (500 VDC)
Output Specifications
Voltage set accuracy Regulation
Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load
General Specifications
Temperature ranges
Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Switching frequency (fixed) Remote On/Off:
Safety standards Safety approvals
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3
DC/DC Converters
TEN 15WI Physical Specifications
Case material Baseplate material Potting material Weight Soldering temperature copper, Nickel plated non conductive FR4 epoxy (flammability to UL 94V-0) 32g (1.09oz) max. 260 C / 10 sec.
15 Watt
Outline Dimensions
50.8
(2.0) (0.20)
5.08
7.62
10.16 10.16
(0.30)
7.62
(0.30)
6 20.32
(0.80)
5 15.2
(0.60)
(0.40)
1 2
4
(1.00)
25.4
Bottom View
(0.40)
3
(0.10)
Pin-Out
Pin 1 2
(0.40)
2.5
Single +Vin (Vcc) -Vin (GND) +Vout No pin -Vout
Dual +Vin (Vcc) -Vin (GND) +Vout Common -Vout
10.2
(0.24)
3 4 5 6
6.0
Insulated baseplate
Remote On/Off
Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitsch tolerances: 0.25 (0.01) Case tolerances: 0.5 (0.02)
Specifications can be changed without notice
Rev. 07/05.2
Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com
Page 3 of 3


▲Up To Search▲   

 
Price & Availability of TEN15WI

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X